Bộ mở rộng 4-ngõ ra điều khiển chuông tích hợp nguồn 24VDC-8A BOSCH FPP-RNAC-8A-4C
Trang Chủ >> Báo cháy-Báo trộm >> Báo cháy BOSCH >> Bộ mở rộng 4-ngõ ra điều khiển chuông tích hợp nguồn 24VDC-8A BOSCH FPP-RNAC-8A-4C Mã số:13040026 Bộ mở rộng 4-ngõ ra điều khiển chuông tích hợp nguồn 24VDC-8A BOSCH FPP-RNAC-8A-4C
– Bộ mở rộng 4-ngõ ra điều khiển chuông và tích hợp nguồn 24VDC/8A.
– FPP‑RNAC‑8A‑4C Remote Notification Appliance Circuit (RNAC) Power Supply 8A of power.
– Fully supervised outputs
– Configurable for NAC output or constant auxiliary power
– Regulated 24 VDC output (nominal) with over‑current protection
– Built‑in NAC patterns
Use the FPP ‑ RNAC ‑ 8A ‑ 4C power supply to add four additional notification appliance circuits to a fire alarm control panel (when connected via the option bus), or as a NAC power supply for fire-protective signaling systems (when connected directly to the NAC output).
The additional notification appliance circuits can beNFPA 72, Class B (Style Y) or Class A (Style Z). This regulated power supply provides up to 8 A of power that is used to operate both continuous and intermittent loads. This 8 A of power can be distributed through the four output circuits and auxiliary power circuit. The FPP ‑ RNAC ‑ 8A ‑ 4C power supply is UL Listed for use in commercial fire alarm applications.
Compatible Control Panel Connections
– The FPP ‑ RNAC ‑ 8A ‑ 4C power supply is compatible with any UL Listed control panel that uses reverse polarity supervised notification outputs with 12 VDC or 24 VDC regulated outputs.
– FPD ‑ 7024 or FPA ‑ 1000 Analog Addressable Fire Panels: Connect up to four FPP ‑ RNAC ‑ 8A ‑ 4C power supplies to an FPD ‑ 7024 or an FPA ‑ 1000 control panel.
Specifications
Temperature (operating)
+32°F to +120°F (0°C to +49°C)
Response Time (input to output)
10 ms maximum
Color
Red
Dimensions (HxWxD)without door
20.4 in. x 14.8 in. x 4.1 in. (52 cm x 38 cm x 10.4 cm)
Material
cold-rolled steelBase: 18 gauge (1.2 mm)Cover: 19 gauge (1.1 mm)
Current (output)
850 mA maximum
Voltage (output)
24 VDC (regulated)
Output per circuit
2.5 A maximum
Output (total)
8 A (all NAC and auxiliary outputs)
Voltage (output)
24 VDC (regulated)
Voltage (standby)
-24 VDC (regulated)
Compatibility range
19.6 VDC to 27.5 VDC
Current (output)
1.3 A maximum
Voltage (output)
24 VDC nominal
Voltage (ripple)
250 mVp-p
Contact Type
Form C
Rating (contact)
1.5 A at 32 VDC
Current (input)
4.5 A maximum (RMS)
Power (primary input)
120 VAC, 60 Hz or 220 VAC, 50 Hz
Voltage (battery)
24 VDC nominal